Dura Cotta, 15-3/4"D x 12-1/4"H, Wet Clay Stone Planter, Matte Finish, For Matching Saucer Use True Value #548-153.
Dura Cotta, 30"L x 7-5/8"W x 5-3/4"H, Terra Cotta Stone Window Box, Matte Finish, Matching Saucer Available.
Dura Cotta, 19-1/8"D x 3" Deep, Wet Clay Stone Saucer, Matte Finish, For Use With Dura Cotta & Milano Planter.
12-1/4"D x 10-3/4"H, Root, Saturn Planter With Attached Saucer, Matte Finish, For Indoor & Outdoor Use.
Dura Cotta, 24"L x 7-1/2"W x 5-3/4"H, Wet Clay Stone Window Box, Matte Finish, Matching Saucer Available.
Portofino,10 Piece, Cushion Set, Includes: 4 Adjustable Cushion Chairs, 1 Of 60" x 38" Glass Top Table, 1 Of 20" x 20" Side Table, 2 Adjustable Cushion Chairs & 2 Cushion Ottomans, Saddle Brown Steel With Beige Cushion With Brown Detail & Piping.
A Quick Fix Support System For 4x4 Wood Posts Made Out Of 1/8" Galvanized Hardened Steel, Will Anchor A Sagging Post From The Subterranean Wood Below The Cement & Clamp It Down To The Wood Above, Extends The Life Of Your Wood Fence Or Mailbox For Up To 10 More Years, No Need To Remove Or Dig Up The Old Fence Posts Or Cement, Just Hammer The Post Doctor In, Bolt It Down & Secure With A Thin Layer Of Mortar, Kit Includes: 1 Post Doctor, 1 5/16" Drill Bit, 1 Phillips Head Bit, 1 5" Through Bolt, 2 Washers, 2 Lock Washers & 3 Wood Screws, Tools Needed To Install Hammer, Drill, Crescent Wrench, 7/16Th Socket Head Wrench, 2 1" x 6' Wood Braces & 1 Small Bag Of Mortar.
Steel, Reusable, Roof Anchor, Center Holes Are Offset To Reduce Possibility Of Truss Splitting During Installation, Can Be Used Off Peak In Flat Position Without Compromising Strength, Can Be Used With Screws Or Nails, Fit Any Wooden Roof Up To 12/12 Pitch, Includes Fastening Screws, 400 LB Maximum Worker Capacity, Zinc Plated Carbon Steel, Meets ANSI Z359.1-2007 Standard With Screws, Net Weight: 2.1 LB.
A23Z, 2" x 3", Angle Z-Max, Used To Reinforce Right Angle Connections, Fastens Wood To Wood, Made To Help Resist Lateral Forces, 90 Degree Angle, Great For Home Repair Projects, Made With 18 Gauge Z-Maximum Galvanized Steel, Install With Four 10D x 1-1/2" HDG Nails Into Base & Four 10D x 1-1/2" HDG Nails Into Post.